- Home
- Pool & Spa Supplies
- Pool & Spa Shock Treatments
- Blue Horizons Granular Shock Chlorine 5Kg
Blue Horizons Granular Shock Chlorine 5Kg
SKU 87009507
- To Be Purchased By Trade Professionals Only
- Blue Horizons Granular Shock
- A traditional shock treatment product, these calcium hypochlorite granules have an available chlorine level of approximately 65% making them a good chlorine donor for pool water problem solving.
- Granular Shock Chlorine is very effective at restoring sparkling water from algae infestation.
- Granular Shock Chlorine can be added through the skimmer.
- Please refer to the Blue Horizons Pool Care guide for further product information in our downloads section.
Qty | Price | Saving |
---|---|---|
4+ | £28.47 | 5% |
Blue Horizons Granular Shock Chlorine is a calcium hypochlorite granular shock chlorine can be used as part of your winterising programme for your outdoor pool.
Granular Shock Chlorine is a highly concentrated chlorine used to shock your swimming pool water on a regular basis, usually this should be done every 2 weeks or more frequently during hot weather, or if your pool water has turned green.
Granular Shock Chlorine is very effective at restoring sparkling water from algae infestation. Granular Shock Chlorine can be added through the skimmer. Also use this product if the pool has been neglected or algae growth has appeared on the floors and walls of the pool, or there has been an exceptionally high bather load.
Equivalent to Shock Xtra, Rapid Shock. Helps prevent and remove algae. Destroys swimmer wastes. May be used for regular disinfection. pH 11.5. Part of the BOAST system.
How to apply chlorine shock granules:
1- Maintain pH levels within the ideal range 7.2 -7.6. If the level is not in this range, adjust.
2- Maintain free chlorine residuals routinely in the 1 -3mg/l (ppm) range. Shock or oxidising procedures are recommended either weekly or fortnightly with a maximum of 10mg/l (ppm) for a full shock treatment.
3- Pre-dissolve this product in a clean plastic container at a maximum rate of 100g of product for 2.2 gallons (10 litres) of water. Stir well to ensure product is fully dissolved. Add the resulting solution to the pool whilst the pump is turned on preferably near the water inlets to aid distribution.
4- Repeat dose/application if necessary to achieve the desired level.
5- After using this product, pool water may become temporarily cloudy, so keep the filtration pump running until it clears.
6- After shock treatment, allow the chlorine to drop below 5mg/l before bathing recommences, and in any event wait for at least 30 minutes! Always test your water AFTER dosing and PRIOR to bathing.
Dosing Rates
Water Volumes | To increase Chlorine Level | |||
---|---|---|---|---|
Litres | Gallons | 1 mg/l | 5mg/l | 10mg/l |
4,545 | 1,000 | 7g | 35g | 70g |
11,360 | 2,500 | 17g | 88g | 175g |
22,725 | 5,000 | 35g | 175g | 350g |
68,175 | 15,000 | 105g | 525g | 1050g |
Customer Reviews
Enov Colour
Coding
Chart - Standard
(Size: 642 KB)
|
Download Enov Colour Coding Chart - Standard
|
Kleanz-All Leaflet -
Info
(Size: 651 KB)
|
Download Kleanz-All Leaflet
|
All images used are for illustrative purposes and are not intended to be relied upon for, nor to form part of, any contract unless specifically incorporated in writing into the contract.
We reserves the right to change product images at any time without notice.
Product Haggle
You can haggle for a volume discount (enter a number of items), you can tell us you found it cheaper somewhere else (enter the web address), or you can simply 'make us an offer!' Don't forget to enter your details, we'll get back to you to respond to your haggle.